|
surfing72 | Set | | | Reg. Date | : | 20/03/2012 | Posts | : | 483 | Location | : | Nth, New South Wales, Australia |
|
| Posted : 16 Feb 2013 - 08:18 Post title : Cheap Chrome mirors | | Well I had my heart set on a pair of Rizoma Senso mirrors to replace the massive (but practical) standard mirrors but at $400 Australian they were way to dear for me . For those that aren't familiar with these mirrors, check out birdy68 pics. They look unreal. So any way I found a pair of cheap mirrors on ebay for $60 delivered. They arrived within a week from Thailand and were gift wrapped with a personal hand written note. I haven't experienced customer service like this before over the net and didn't expect it coming from Thailand. The only thing better would have been a massage with a happy ending. The mirrors come with an assortment of bolts so that they will fit a variety of bikes. All I had to do was make a rubber bush / grommit out of an old spear gun rubber to take up the slack around the bolt within the switch housing. Yeah the new mirrors are way smaller and lower than the standard ones and I can already here all you old blokes saying how they are not practical and you actually want higher bigger mirrors but I don't like the look of riding around with a couple of bathroom mirrors strapped to my bars so I'll give these a run. I thought at $60 its not a bad risk to take. I would hate to spend $400 on Rizoma and then realise they are to small. Below are some pics (sorry about the quality). See what you reckon. If you want to check them out on ebay you can search for "Chrome mirors aluminum 10mm for motorcycle chopper cruiser racer KiWAV Magazi"
| Dan
| Post edited by surfing72 on 16 Feb 2013 - 08:21 |
|
|
|
Smitty | Chaac | | | Reg. Date | : | 01/10/2012 | Posts | : | 996 | Location | : | Hawkesbury, NSW, Australia |
|
| Posted : 16 Feb 2013 - 08:33 Post title : Re: Cheap Chrome mirors (Re: surfing72) | | They look neat..... How is the quality and do they work ok, or are you just looking at your own shoulders ?
| Cheers Smitty
2013 Matt Graphite Storm, Foran Razorbacks, Hagon shocks & springs. I don't get angry, I get even
|
|
|
|
surfing72 | Set | | | Reg. Date | : | 20/03/2012 | Posts | : | 483 | Location | : | Nth, New South Wales, Australia |
|
| Posted : 16 Feb 2013 - 08:41 Post title : Re: Cheap Chrome mirors (Re: Smitty) | | Yeah its hard to say Smitty. I just fitted them 1 hour ago and its getting dark and pissing rain to I haven't gone for a run yet. I have to admit that when I only had one fitted there was a dramatic difference in rear vision compared to the stock one still attached. I guess I'll be doing a lot of head checks before lane changing etc.. I reckon they really suit the Tars though. The quality looks great but time will tell.
| Dan
|
|
|
|
Ditch | Set | | Reg. Date | : | 16/11/2012 | Posts | : | 228 | Location | : | United Kingdom |
|
| Posted : 16 Feb 2013 - 21:01 Post title : Re: Cheap Chrome mirors (Re: surfing72) | |
surfing72 wrote:
Well I had my heart set on a pair of Rizoma Senso mirrors to replace the massive (but practical) standard mirrors but at $400 Australian they were way to dear for me . For those that aren't familiar with these mirrors, check out birdy68 pics. They look unreal. So any way I found a pair of cheap mirrors on ebay for $60 delivered. They arrived within a week from Thailand and were gift wrapped with a personal hand written note. I haven't experienced customer service like this before over the net and didn't expect it coming from Thailand. The only thing better would have been a massage with a happy ending. The mirrors come with an assortment of bolts so that they will fit a variety of bikes. All I had to do was make a rubber bush / grommit out of an old spear gun rubber to take up the slack around the bolt within the switch housing. Yeah the new mirrors are way smaller and lower than the standard ones and I can already here all you old blokes saying how they are not practical and you actually want higher bigger mirrors but I don't like the look of riding around with a couple of bathroom mirrors strapped to my bars so I'll give these a run. I thought at $60 its not a bad risk to take. I would hate to spend $400 on Rizoma and then realise they are to small. Below are some pics (sorry about the quality). See what you reckon. If you want to check them out on ebay you can search for "Chrome mirors aluminum 10mm for motorcycle chopper cruiser racer KiWAV Magazi"
|
|
Dan, You can't go wrong at $60 delivered,
I agree I would love a pair of the Rizoma Senso mirrors, but again cannot really justify this cost to the .................... SWMBO !!!!
I might just have a punt myself at that price mate !!!
Ditch.
|
|
|
|
|
mat1600 | Thunderbird | | | Reg. Date | : | 06/03/2010 | Posts | : | 8,596 | Location | : | Bridlington, Democratic Independant State of Yorkshire, United Kingdom |
|
| Posted : 16 Feb 2013 - 22:28 Post title : Re: Cheap Chrome mirors (Re: surfing72) | | Would be really nice if they had sent a matching pair.
They do look nice. I really like the stems, but I do prefere a bigger mirror. I like to see whats going on behind as well as in front of me.
Cool looking though.
| My first natural instinct is to breathe. My second is to evade tax's.
|
|
|
|
Ditch | Set | | Reg. Date | : | 16/11/2012 | Posts | : | 228 | Location | : | United Kingdom |
|
| Posted : 16 Feb 2013 - 22:33 Post title : Re: Cheap Chrome mirors (Re: mat1600) | |
mat1600 wrote:
Would be really nice if they had sent a matching pair.
They do look nice. I really like the stems, but I do prefere a bigger mirror. I like to see whats going on behind as well as in front of me.
Cool looking though.
|
|
You mean to tell me they don't come like that, Oh not interested now !!!
Yer "Cock" !!
Ditch.
|
|
|
|
|
zolti | Thor | | | Reg. Date | : | 23/03/2010 | Posts | : | 3,127 | Location | : | newcastle , United Kingdom |
|
| Posted : 17 Feb 2013 - 08:26 Post title : Re: Cheap Chrome mirors (Re: mat1600) | |
mat1600 wrote: I do prefere a bigger mirror. I like to see whats going on behind as well as in front of me.
|
|
how does a bigger mirror help you see whats in front?
|
|
|
|
mjgt | Thor | | | Reg. Date | : | 16/09/2011 | Posts | : | 2,201 | Location | : | North Somerset, United Kingdom |
|
| Posted : 17 Feb 2013 - 14:36 Post title : Re: Cheap Chrome mirors (Re: zolti) | | Has it angled to see is face, to make sure the lippy and mascara isn't running yet
| Mick . . . Keep the rubber side down!!
|
|
|
|
nux | Set | | | Reg. Date | : | 15/09/2012 | Posts | : | 25 | Location | : | Brunswick Heads, NSW, Australia |
|
| Posted : 20 Feb 2013 - 12:59 Post title : Re: Cheap Chrome mirors (Re: surfing72) | | Dude, there's a burglar in your garage !
| I long for the day when chickens can cross roads without having their motives questioned.
|
|
|
|
surfing72 | Set | | | Reg. Date | : | 20/03/2012 | Posts | : | 483 | Location | : | Nth, New South Wales, Australia |
|
| Posted : 20 Feb 2013 - 20:37 Post title : Re: Cheap Chrome mirors (Re: nux) | |
nux wrote:
Dude, there's a burglar in your garage ! |
|
Don't worry mate I got him with my glock.
| Dan
|
|
|
|
surfing72 | Set | | | Reg. Date | : | 20/03/2012 | Posts | : | 483 | Location | : | Nth, New South Wales, Australia |
|
| Posted : 23 Feb 2013 - 21:27 Post title : Re: Cheap Chrome mirors (Re: Ditch) | | Well boys I hit the road yesterday and did a quick 100k's testing the new mirrors. I was concerned about how small they are but I can report that they are fine. I can see everything behind me I need to. So if you like the style i reckon its a cheap alternative to stock. As for the quality of the chrome only time will tell I guess. At the moment they look great You gotta love ebay, Dan
| Dan
|
|
|
|
Ditch | Set | | Reg. Date | : | 16/11/2012 | Posts | : | 228 | Location | : | United Kingdom |
|
| Posted : 24 Feb 2013 - 13:46 Post title : Re: Cheap Chrome mirors (Re: surfing72) | | Dan,
Just ordered mine up from the same company, although I have opted for the slightly bigger mirror type than yours.
Me Old Eye's ain't what they used to be !!!
Ditch.
|
|
|
|
|
Ditch | Set | | Reg. Date | : | 16/11/2012 | Posts | : | 228 | Location | : | United Kingdom |
|
| Posted : 03 Mar 2013 - 20:38 Post title : Re: Cheap Chrome mirors (Re: Ditch) | | Been busy, with getting a couple of jobs done for the on set of better weather !!! "Please" !!!!
So Just finished this little project off now !!
Had to make some Cam's up out of Stainless steel to make them fit, which turned out OK.
Very happy with result, cannot knock value for money, these are the larger type, and they are as near dam-it to the original length and height as the standard ones.
With of course, the exception of the machined out stems, and tear drop mirrors, the mirrors also have a "Blind Spot" in the mirror !!!
Ditch.
|
|
|
|
|
surfing72 | Set | | | Reg. Date | : | 20/03/2012 | Posts | : | 483 | Location | : | Nth, New South Wales, Australia |
|
| Posted : 04 Mar 2013 - 01:58 Post title : Re: Cheap Chrome mirors (Re: Ditch) | | Great job mate. They look good. Its great that you have obtained the same height and width as stock but a better looking mirror. You say you have a blind spot? Are you still going to keep them on? There is no doubt my mirrors offer less vision than stock but I haven't experienced a blind spot as such. In saying that, I always check mirrors and then do head checks before making a movement on the road. Cheers, Dan
| Dan
|
|
|
|
Ditch | Set | | Reg. Date | : | 16/11/2012 | Posts | : | 228 | Location | : | United Kingdom |
|
| Posted : 04 Mar 2013 - 12:45 Post title : Re: Cheap Chrome mirors (Re: surfing72) | | surfing72 wrote:
Great job mate. They look good. Its great that you have obtained the same height and width as stock but a better looking mirror. You say you have a blind spot? Are you still going to keep them on? There is no doubt my mirrors offer less vision than stock but I haven't experienced a blind spot as such. In saying that, I always check mirrors and then do head checks before making a movement on the road. Cheers, Dan |
|
Hi Dan,
Sorry to confuse you, when I refer to a "Blind Spot" on the mirror, it is where the manufacturer has gone one step onward from the standard mirror, this has a vertical line towards the outside of the mirror lens, and gives as best described, as a convex angle to pick up "Blind Spots", which in fact is better than that, of a plain mirror lens. "If that makes any sense'!!
Sorry for the confusion, but got to say, pleased as punch with the finished job !!!
Ditch.
|
| Post edited by Ditch on 04 Mar 2013 - 12:48 |
|
|
|
mat1600 | Thunderbird | | | Reg. Date | : | 06/03/2010 | Posts | : | 8,596 | Location | : | Bridlington, Democratic Independant State of Yorkshire, United Kingdom |
|
| Posted : 04 Mar 2013 - 15:25 Post title : Re: Cheap Chrome mirors (Re: Ditch) | | They look good, real good.
Nice job.
| My first natural instinct is to breathe. My second is to evade tax's.
|
|
|
|
Ditch | Set | | Reg. Date | : | 16/11/2012 | Posts | : | 228 | Location | : | United Kingdom |
|
| Posted : 04 Mar 2013 - 15:32 Post title : Re: Cheap Chrome mirors (Re: mat1600) | | Cheers Shag !!!
|
|
|
|
|
slotter32 | Set | | | Reg. Date | : | 11/12/2011 | Posts | : | 196 | Location | : | Australia |
|
| Posted : 25 Jul 2013 - 22:57 Post title : Re: Cheap Chrome mirors (Re: Ditch) | | Damn Ditch that bike is looking fantastic mate. Where did you get that Flyscreen from and does it come with the chrome brackets as fitted to your bike? Also did you manufacture the mirror stem extensions yourself? What is the diameter of the stem section that meets up with the mirror? I have a set of Kuryakyn Sythe mirrors that are pretty cool too but having ridden with them they are just a bit low in the stem in case I need to hit the levers in an emergency because the clearance between mirror and grip is a bit low. Those stem extensions would be ideal in correcting that problem.
Cheers.
| Mods: Chrome wheels, chrome forks, chrome water manifold, chrome switch blocks, front axle covers, Speedmaster tank badges, chrome pulley, chrome swing arm covers, chrome lower belt guide, chrome upper and lower fork yokes, deuce risers, kuryakan iso grips, chrome fork nut and centre bearing caps
|
|
|