Username    Password    Login Remember me Cancel Remember me    Forgot your password? Change your password  

General -> Accessories."Edge Brackets" f... - 18" smoke windvest wit...
Categories : 
Topic : motolight madness
 Author 
Post  
 lucasofborg 
Set
Reg. Date : 12/03/2011
Posts : 8
Location : sugar land , texas, United States
Posted : 26 Mar 2012 - 21:04   Post title : motolight madness
 
all
i have watched while all of you tell tles of easy wiring and installation of these cursed lights. please guide me.

i hooked up the lights to the bird using the yellow parking light wire in the bucket and wiring out the motolight switch. in theory this would allow the lights to operate as the headlights do. easy peasy, right??
BUT when i turn the lights on the ML's stay off, when i turn the key to the OFF position (no headlights) the lights go on! At first glance it would appear that the relay, which should close upon energization is wired backwards and CLOSES (NC vs NO) when power is taken from the control leg. I wired the ML supplied switch in to verify and i can get the ML to operate only when the key is in the OFF position (or in my pocket).

Bad relay?? bad owner?? payback??

BTW, i ca't seem to get ML on the phone.



 Author 
Post  
 EnGage 
Thor
Reg. Date : 14/07/2009
Posts : 3,155
Location : Grand Rapids, MI, United States
Posted : 27 Mar 2012 - 13:40   Post title : Re: motolight madness (Re: lucasofborg)
 
There are a couple of ways to wire motolights, but here is a thread I put together for the proper wiring using the wires for the Auxiliary switch: Link

 Author 
Post  
 lucasofborg 
Set
Reg. Date : 12/03/2011
Posts : 8
Location : sugar land , texas, United States
Posted : 29 Mar 2012 - 19:13   Post title : Re: motolight madness (Re: EnGage)
 
Problem solved
Relay from motolights was wired incorrectly as normally closed vs normally open. new relay fixed problem.