|  | Topic : hogslayer versus TOR pipes |  |
| | | edmontonstorm | | Jupiter |  |  | | Reg. Date | : | 12/09/2014 | | Posts | : | 1,054 | | Location | : | Alberta, Canada |
|
| | Posted : 10 May 2016 - 14:53 Post title : hogslayer versus TOR pipes | | | was thinking about this the other day, anyone know if these are similar in terms of flow or if one is much more free flowing than the other, and how much of an affect it might have on tunes? (with same intake flow)
| Gloss Black 2013 Storm ABS - K&N (seal removed) - Mustang Seat - Hogslayer pipes - PCV-AT300
|
|
| | | daz | | Zeus | |  | | Reg. Date | : | 12/05/2009 | | Posts | : | 7,711 | | Location | : | United States |
|
| | Posted : 10 May 2016 - 15:38 Post title : Re: hogslayer versus TOR pipes (Re: edmontonstorm) | | | Hogslayers will flow more if for no other reason than they eliminate the cat. Plus the mufflers are more open than tors i'm sure. Also louder. Impact on tunes....well, i have tried the same tune with no cat at all (elbows) and with a gutted cat and there is a bit better power w/o any cat at all. Also loud as hell with elbows, which i suspect would be even louder with hogslayers. (straight thru connector pipes)
| 2010 Blue/White Thunderbird, "Brutus". 1700 kit, short tors, gutted cat, UNI filter, filter seal off, custom tune. Brutus in his native habitat: Link
|
|
| | | Stretchman | | Set | | | Reg. Date | : | 15/01/2016 | | Posts | : | 147 | | Location | : | Dania Beach, Florida, United States |
|
| | Posted : 10 May 2016 - 15:50 Post title : Re: hogslayer versus TOR pipes (Re: daz) | | | What does doing the pipes do to the low end torque?
More open systems have a tendency to produce torque and hp higher in the rev range.
Does de-catting affect low end as well?
|
|
| | | esem | | Set | |  | | Reg. Date | : | 21/04/2014 | | Posts | : | 92 | | Location | : | West Aus, Australia |
|
| | Posted : 10 May 2016 - 23:28 Post title : Re: hogslayer versus TOR pipes (Re: edmontonstorm) | | | I have had (and still have in the garage) the short tors, the long tors and currently on the Storm the hogslayers. I have used both sets of tors with the Meerkat crossover and the hogs connect directly to the headers.
I have not put it on the dyno in any configuration but my butt tells me the main difference is the look. Hogslayers are tighter to the mc and look much better. IHMO.
| Funny, I don't remember being absent-minded.
|
|
|
| |
| |
|