| General -> Accessories. | A very handy rack - Drivers Backrest for the Th... | | | | Categories : |
|  | Topic : BR Custom Cycles handle bar on my 2013 Storm |  |
| | | eddieriv | | Set |  |  | | Reg. Date | : | 21/06/2015 | | Posts | : | 25 | | Location | : | Bloomfield, NJ, United States |
|
| | Posted : 28 Aug 2015 - 11:02 Post title : BR Custom Cycles handle bar on my 2013 Storm | | | I looked everywhere for handlebars that fit a Tbird, nobody has them so I had to have them made, I went with brcustomcycles.com, they're good but the wait to have a set made can be 3 months but well worth the wait in my opinion .
|
|
| | | Irish | | Chaac | |  | | Reg. Date | : | 28/10/2013 | | Posts | : | 854 | | Location | : | New England, NSW, Australia |
|
| | Posted : 28 Aug 2015 - 11:23 Post title : Re: BR Custom Cycles handle bar on my 2013 Storm (Re: eddieriv) | | | they look wicked, ma man. really nice job
|
|
| | | edmontonstorm | | Jupiter | |  | | Reg. Date | : | 12/09/2014 | | Posts | : | 1,054 | | Location | : | Alberta, Canada |
|
| | Posted : 28 Aug 2015 - 14:07 Post title : Re: BR Custom Cycles handle bar on my 2013 Storm (Re: Irish) | | | details? how much longer did you make all cables? ABS? what height are those and what risers are those? any pull back in the bars?
thanks.
| Gloss Black 2013 Storm ABS - K&N (seal removed) - Mustang Seat - Hogslayer pipes - PCV-AT300
|
|
| | | Swagger | | Jupiter | |  | | Reg. Date | : | 15/04/2012 | | Posts | : | 1,100 | | Location | : | United Kingdom |
|
| | Posted : 28 Aug 2015 - 15:00 Post title : Re: BR Custom Cycles handle bar on my 2013 Storm (Re: eddieriv) | | | They're different. Stick some close ups on ... Like to see the detail. 
| The Force is strong in this one
|
|
| | | eddieriv | | Set | | | | Reg. Date | : | 21/06/2015 | | Posts | : | 25 | | Location | : | Bloomfield, NJ, United States |
|
| | Posted : 28 Aug 2015 - 15:21 Post title : Re: BR Custom Cycles handle bar on my 2013 Storm (Re: edmontonstorm) | | | I bought the bike used, it already had the stock 1'' apes on it so I lucked out because the stock cables fit perfectly. The 4'' risers are from Ebay, not my first choice but not bad for the money Link , my Storm is ABS.
The apes are 10'' tall, 1 1/2'' thick reduced to 1'' at the risers & grips, I don't recall the pullback, i'll take some side pics & post them, I had to take a lot of measurements for the guy at BR & I had to send him quite a few pics of the bike, he asked a lot of questions, don't remember exactly how the conversation went but he got it right, I had to wait for 3 months to get them but i'm very happy with the bars.
If you want to call BR he should be able to look up my order, I sent him pics of the bike, he'll know who I am, look him up on YouTube, he's the bald guy, he's the one you'll talk to if you call, great guy.
        
| | Post edited by eddieriv on 28 Aug 2015 - 16:36 |
|
| | | GerPa | | Jupiter | |  | | Reg. Date | : | 10/12/2011 | | Posts | : | 1,919 | | Location | : | Mackay, Central Queensland, Australia |
|
| | Posted : 29 Aug 2015 - 05:33 Post title : Re: BR Custom Cycles handle bar on my 2013 Storm (Re: eddieriv) | | |  Each to their own.
|  May-2011-1600, 20306 Tune, Mustang Vintage Solo Seat, Meerkat Cat Bypass, + Meerkat Modified Short TORS  ,K&N Air Cleaner,K&N Oil Filter, JBQ lifting system, Gold Plug Magnetic Sump Plug,Dart Fly screen, Rivco Risers, GiPro Gear Indicator, Breakaway Cruise Control, Avon ISO Grips, Scorpion Western Low Handlebars, Kury Switchblade Pegs, Garmin Zumo390LM,Michelin RC2 on Front RC 3 on ,Modified Rear Drive Pulley Hub Bearings (Mat1600/Alex4 Modification) Front Susp: Std & 7.5W Oil /126mm Air Gap & Rear:Hagon Nitro's with 26Kg/cm Springs + Lots of other "Bling" stuff.
|
|
| | | eddieriv | | Set | | | | Reg. Date | : | 21/06/2015 | | Posts | : | 25 | | Location | : | Bloomfield, NJ, United States |
|
| | Posted : 13 Dec 2015 - 18:50 Post title : Re: BR Custom Cycles handle bar on my 2013 Storm (Re: Irish) | | | I swapped out the risers, the other ones got old real quick, I couldn't lift the tank without removing the rear pivot bolt so they had to go, I found these on ebay, they're better looking than the other ones, these risers are cupped underneath so I was able to leave the top rubber bushings in place, the top bushing caps were not needed.
  
Here's the link to them on ebay, they come in different lengths & finishes. Link
|
|
|
| |
| |
|